MY High Frequency Induction Heating Machine-1736213848696546
PRODUCT INTRODUCTION
High frequency induction heating machine is widely used for metal heating treatment, such as hardening, annealing, forging, melting, brazing, tempering, quenching, forging and so on.
Advantages of induction heating machine.
Heating fast: this is the heating rate of less than 1 second (speed adjustable speed control).
Heating wide: wide range of metal parts can be heated (according to the different shape of the workpiece replacement of removable induction loop).
Easy installation: connect the power, induction loop and out of the water can be used; small size, light weight, easy to use.
Simple operation: a few minutes to learn.
Start fast: you can start with water after the heating power.
Low power consumption: high-frequency device than the old-fashioned tube about 70% energy saving, the smaller the power consumption of the smaller parts.
Good effect: the heating is very uniform (also by regulating the induction coil density, so that all parts of the workpiece to obtain their desired temperature), heating up fast, less oxide layer after annealing without waste.
Adjustable power: The Promise adjust the output power.
Protection all: with over voltage, over current, overheating, lack of water and other alarm indicator, and automatic control and protection.
◆ Features:
Model: 15KW, 25KW, 35KW 45KW, 60KW, 80KW, 100KW, 120KW, 160KW.
◆ IGBT Type
Frequency: 30 ~ 100KHZ.
24 Hour counitinous work.
Voltage & current full display. Adjust heating, Holding time.
Easy to operate and more stable.
Design different type indcution coil.
PRODUCT ADVANTAGE
PRODUCT PARAMETERS
Technical Data | ||||
Model | MY-15KW | MY-25KW | MY-35KW | MY-45KW |
Input Voltage | 220V | 3 x 380V, 50/60HZ | ||
Input Current | 20A | 30A | 50A | 65A |
Ouptut Power | 1~15KW | 1~25KW | 1 ~ 35KW | 1~45KW |
Output Frequency | 30~100KHZ | 30~80KHZ | ||
Cooling Water | 0.2 Mpa 2 ~ 6 L/Min | 0.2 Mpa 4 ~ 8 L/Min | ||
Cable Length | 1 ~ 5 meters | |||
Size (cm) | 48 x 21 x 44 | 59 x 24 x 48 | 65 x 26 x 52, 58 x 28 x 48 | 69 x 31 x 52, 58 x 28 x 48 |
Weight | 22kg | 30 kg | 60 kg | 70 kg |
Model | MY-60KW | MY-80KW | MY-120KW | MY-160KW |
Input Voltage | 3 x 380V, 50/60HZ | |||
Input Current | 90A | 120A | 50A | 65A |
Ouptut Power | 1~60KW | 1~80KW | 1 ~ 120KW | 1~160KW |
Output Frequency | 10~50KHZ | 10~5KHZ | ||
Cooling Water | 0.2 Mpa 4 ~ 10 L/Min | 0.2 Mpa 5-12 L/Min | ||
Cable Length | 1 ~ 5 meters | |||
Size (cm) | 75 x 55 x 80, 60 x 50 x 55 | 75 x 55 x 80, 60 x 50 x 55 | 75 x 55 x 120, 70 x 55 x 60 | 75 x 55 x 120, 70 x 55 x 60 |
Weight | 80kg | 100 kg | 120 kg | 140 kg |
APPLICATION PICTURES
Brazing, forging, hardening tempering, annealing quenching, melting, other heating treatment.
Heat treatment for various hardware and tools, such as plier, wrench, hammer, ax,screwing tools and shear.
Heat treatment for various automobile and motorcycle fittings, such as crankshaft,connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft,semi drive shaft, small shaft and fork.
Heat treatment for various electric tools, such as gear and axes.
Heat treatment for machine tools,such as lathe deck and guide rail.
Hardening for various hardware metal parts and machined parts, such as shaft, gear chain wheel, cam, chuck and clamp etc.
Heating for hardware molds, such as small-size mold, mold accessory and inner hole of mold.
Annealing of various stainless steel products, such as stainless steel basin, annealed and extruded can, annealed folded edge, annealed sink, stainless steel tube, tableware and cup.
Forging of various other metal work pieces, such as round steel, sheet/plate, pipe and others.
QUICK LINKS
PRODUCTS
CONTACT US
Tel : 86-532-89980348
Address : No.25-401, U-Valley Industry Park, High-tech Zone, Qingdao, China
SHUIMU INDUCTION
We provide OEM service for induction heating machine, melting furnace and induction coil, supply technical support for heating treatment, Supply training for product operation.
