High Frequency Induction Heating Machine

这里可以自定义设置

PRODUCT INTRODUCTION

High frequency induction heating machine is widely used for metal heating treatment, such as hardening, annealing, forging, melting, brazing, tempering, quenching, forging and so on.

Advantages of induction heating machine.

Heating fast: this is the heating rate of less than 1 second (speed adjustable speed control).

Heating wide: wide range of metal parts can be heated (according to the different shape of the workpiece replacement of removable induction loop).

Easy installation: connect the power, induction loop and out of the water can be used; small size, light weight, easy to use.

Simple operation: a few minutes to learn.

Start fast: you can start with water after the heating power.

这里可以自定义设置

Low power consumption: high-frequency device than the old-fashioned tube about 70% energy saving, the smaller the power consumption of the smaller parts.

Good effect: the heating is very uniform (also by regulating the induction coil density, so that all parts of the workpiece to obtain their desired temperature), heating up fast, less oxide layer after annealing without waste.

Adjustable power: The Promise adjust the output power.

Protection all: with over voltage, over current, overheating, lack of water and other alarm indicator, and automatic control and protection.

◆ Features:

Model: 15KW, 25KW, 35KW 45KW, 60KW, 80KW, 100KW, 120KW, 160KW.

◆ IGBT Type

Frequency: 30 ~ 100KHZ.

24 Hour counitinous work.

Voltage & current full display. Adjust heating, Holding time.

Easy to operate and more stable.

Design different type indcution coil.

PRODUCT ADVANTAGE

ENERGY CONSERVATION Energy saving with more heating effect

HEAT CONDUCTION Quickly heating speed

OPERATION & CONTROL Easy to operate and temperature control

ENVIRONMENTAL PROTECTION Non-pollution with small noise for working

这里可以自定义设置

CONTACT US NOW!

Provide you with free samples and technical advice at your convenience.

Leave your email and phone no. Here right now.

PRODUCT PARAMETERS

Technical Data
Model	MY-15KW	MY-25KW	MY-35KW	MY-45KW
Input Voltage	220V	3 x 380V, 50/60HZ
Input Current	20A	30A	50A	65A
Ouptut Power	1~15KW	1~25KW	1 ~ 35KW	1~45KW
Output Frequency	30~100KHZ			30~80KHZ
Cooling Water	0.2 Mpa 2 ~ 6 L/Min		0.2 Mpa 4 ~ 8 L/Min
Cable Length	1 ~ 5 meters
Size (cm)	48 x 21 x 44	59 x 24 x 48	65 x 26 x 52, 58 x 28 x 48	69 x 31 x 52, 58 x 28 x 48
Weight	22kg	30 kg	60 kg	70 kg

Model	MY-60KW	MY-80KW	MY-120KW	MY-160KW
Input Voltage	3 x 380V, 50/60HZ
Input Current	90A	120A	50A	65A
Ouptut Power	1~60KW	1~80KW	1 ~ 120KW	1~160KW
Output Frequency	10~50KHZ			10~5KHZ
Cooling Water	0.2 Mpa 4 ~ 10 L/Min		0.2 Mpa 5-12 L/Min
Cable Length	1 ~ 5 meters
Size (cm)	75 x 55 x 80, 60 x 50 x 55	75 x 55 x 80, 60 x 50 x 55	75 x 55 x 120, 70 x 55 x 60	75 x 55 x 120, 70 x 55 x 60
Weight	80kg	100 kg	120 kg	140 kg

这里可以自定义设置

APPLICATION PICTURES

Brazing, forging, hardening tempering, annealing quenching, melting, other heating treatment.

Heat treatment for various hardware and tools, such as plier, wrench, hammer, ax,screwing tools and shear.

Heat treatment for various automobile and motorcycle fittings, such as crankshaft,connecting rod, piston pin, chain wheel, aluminum wheel, valve, rock arm shaft,semi drive shaft, small shaft and fork.

Heat treatment for various electric tools, such as gear and axes.

Heat treatment for machine tools,such as lathe deck and guide rail.

Hardening for various hardware metal parts and machined parts, such as shaft, gear chain wheel, cam, chuck and clamp etc.

Heating for hardware molds, such as small-size mold, mold accessory and inner hole of mold.

Annealing of various stainless steel products, such as stainless steel basin, annealed and extruded can, annealed folded edge, annealed sink, stainless steel tube, tableware and cup.

Forging of various other metal work pieces, such as round steel, sheet/plate, pipe and others.

Felid Joint Coating

PWHT

Pipe Weld Preheating With Heating Blanket

Weld Preheating and PWHT

PWHT

Big Size Part Weld Preheating and PWHT

INDUCTION HEATING MACHINE

MY High Frequency Induction Heating Machine